Okay, a dumb question: Why the plywood in the first place? We tiled out
backsplash to the dry wall using mastic.
"Charles Spitzer" wrote in message
...

"Jennifer" wrote in message
ups.com...

Charles Spitzer wrote:
the above not withstanding, as long as it's dry, plywood doesn't
warp,
especially if securely fastened to the studs.

the answer is yes, you can. use mastic instead of thinset.

But it does give. If you stand on a piece of securely attached plywood
and bounce up and down, it may move up and down with you. Over time,
this kind of motion can lead to cracks, if not in the mastic, then
certainly in the grout.

On the wall it probably doesn't matter, but I would (and did) use
backerboard on the floor over plywood. I wouldn't want to gamble with
mastic over plywood.

--
Jennifer

then your substrate on the floor isn't stiff enough. there's a maximum
deflection allowable for tile. if you don't follow that, then it won't
work. plywood on the floor is ok as long as it's stiff enough.

the OP was talking about kitchen backsplashes. no one's going to be
walking there. i'd be really surprised if it 1/2" or 3/4" plywood ever
flexed in that situation. if it did, there's be a lot more problems than
cracking tiles/grout.