Thread
:
Questions about Under Sink Heaters
View Single Post
#
7
Rob Graham
Posts: n/a
Questions about Under Sink Heaters
(Rob Graham) wrote in message . com...
I've done a trawl of the archive and I've found some answers, but in
some ways some more questions.
I've a 12 metre plus run to the kitchen sink from the HW tank with
only a 3 - 4 metre head, and have compounded the problem by fitting a
pull out mixer tap which has a high insertion loss. Various solutions
have been played with but a local heat source off the mains seems the
best option.
Just how good are under-sink heaters ? what is the storage types ?
why do they vary in power from 2.2 to 9.5Kw? What is the problem with
expansion - I would have just a short pipe run to the mixer tap ?
Would I be best to arrange a longer run ? I've seen something about
vented taps - how do these things fit in with an ordinary mixer?
Any help would be appreciated guys, many thanks.
Rob
Here's some more answers to my own questions -
http://www.heatraesadia.com/hs/heatraes.nsf
if you go to the 'accessory packs', ther is a link there to
installation diagrams which are very useful.
Rob
Reply With Quote