This is not Wipe-on Poly; however, that's the way I am applying it. The
first coat anyway.......since it soaks in so quickly. The following coats
were sprayed on from a spray can. Same stuff though. I've never had a
problem before, even with Eastern Red Cedar. Thanks.

Barry


"Tom Storey" wrote in message
news:hHbje.1419619$8l.196013@pd7tw1no...
Probably not related to your problem but...I've been having a devil of a
time getting Minwax wipe on poly to dry on a few pieces. The last two were
untreated ash and canarywood. I don't think it was too humid or cold in
the
shop for it to set properly. I've since put the can in the back of the
finishing cupboard!

Tom

"Barry N. Turner" wrote in message
news
I just turned a natural edge bowl from a piece of red cedar. I wiped on
a
coat of Minwax poly........then wiped off the excess. I let it dry
overnight. No problem. I sanded lightly with 320, then sprayed a
couple
of
light coats of the same finish. Its been at least 8 hours and its still
tacky. What gives? Is the oil in the wood preventing it from drying
properly? The humidity has been a bit high today. Maybe that's it.
Thanks.

Barry