"news.east.cox.net" wrote in message
I found that sometimes, the finger bar doesn't always lay flat to the edge
of the wood you plan to cut. Even a 1/32 can make the fit tight. I find
that this can happen when I use a scrap piece of wood that isn't perfectly
flat as a backer. Now, I have a 3/4" 16 ply BB plywood that I use and
replace when needed.

The fit of parts cut later is definitely tighter than the test cuts were ...
I'll check that out. Thanks for the heads-up.

--
www.e-woodshop.net
Last update: 5/06/05