Lee K Gleason:
Obviously a failure in the vertical deflection.... could be a bad V
output chip or something as simple as cracked or dry solder connection
near and around that chip or the power resistors and other high heat
producing parts that supply B+ to that circuitry.
Either way... this repair usually is not very expensive and as long as
the television had an acceptably bright and good picture before the
failure then it certainly is worth fixing unless of course you have
extra bucks that you are wanting to spend.... so go ahead and junk it
and buy a new disposable television that most likely will NOT have the
build quality of your Mitz.
electricitym
- - - -