Glue is usually slightly grey in colour, maybe a bit brownish. Like the
stuff from the glue guns. Best to physically remove the coil, clean the glue
residue form the pcb and leads of the coil, then reinstall the coil. Seen a
lot of guys try to just resolder them and have other problems later. Agree
with tender care in sliding the pcb out of the plastic tray, they do stick
at times and make it a bit of a chore.
"Rono" wrote in message
...
Be carefull not to force the board, but pull it away
from the tray firmly. They get stuck in there sometimes.
The coil IS the only problem. Solder it! Rono,