"Scott" wrote in message
oups.com...
The tools marked "525" are Blackalloy. It is a similar tool to the
others mentioned. Its advantage is its interrupted cut strength. Great
for hex stock in stainless. Its weakness is temperature shock. In
other words flood cool and keep it cool or grind hot and DON'T DIP IT.
Temperature shock will cause flaking on the cutting edge. Overheating
will not anneal it. In fact it can be brazed like carbide when it gets
to short or to make form tools. The starting cutting speeds are double
those of cobalt. It used to be made in NYC, NY. They had cards with
geometry and cutting speeds. It is most often abused by DIPPING IN
WATER when sharpening.


Well that's a very useful and important piece of information. I would
certainly have made that mistake. Now that you mention it, how about
Stellite and Tantung G . Do we treat them like HSS (and dip as we go) or as
525 or what?

Boris

--

-------------------------------------
Boris Beizer Ph.D. Seminars and Consulting
1232 Glenbrook Road on Software Testing and
Huntingdon Valley, PA 19006 Quality Assurance

TEL: 215-572-5580
FAX: 215-886-0144
Email bsquare "at" sprintmail.com

------------------------------------------