FYI
check the web there were 10" floppys but 8" were far more common both the
websites below refer to the original 10" floppys, I don't think the memory
is failing that bad just yet....but whats a couple of inches like NSM said
it's a guy thing......
http://www.bleepingcomputer.com/foru...upedia129.html
or
http://www.burlington.mec.edu/hs/helpdesk/hardware.htm
here's a quote from one of the sites "A drive based on flexible media. The
original floppy disks were 10 in. diameter. Later floppy drives were 5 1/4
in. in diameter. Both of these had flexible media and a flexible outer
jacket. The current standard is a 3 1/2 inch floppy disk contained in a hard
plastic case.Yet this not a hard drive. Its medium is still floppy. The
current standard 3 1/2 floppy disk contains 1.44 MB of information. By
default, the first floppy drive is designated A:"
they may come in all sizes but I still maintain if its important Do A
Backup!!!!!!!!!!!!!!
cheers
chuck
"Attach bullseye here" wrote in message
...
"Vlad" wrote in message
...
On Wed, 23 Mar 2005 21:45:16 -0500, Mike Coslo
wrote:
James Sweet wrote:
"Elle" wrote in message
nk.net...
Is there an authoritative site on the web that discusses which
computers
have this hard drive memory threshhold problem?
Some specs:
Make: Gateway Essential 900C
CPU: Intel 900 Mhz Celeron
Original hard drive: 20 Gigabyte 5M Ultra ATA
I have never gone over 10 Gigabytes of memory. I suppose because I
don't
do
any serious graphics work or play video games. I use the computer
mostly
for
word processing, spreadsheets, the internet, and faxing.
This morning after making some calls and checking the internet a bit,
I
settled on a Seagate 80 Gigabyte Ultra ATA/100, 8 Mb cache, 7200 RPM
drive,
for $90 at Best Buy.
Coulda had a similar Western Digital for about $70, but Seagate seems
to
get
better reviews. Also, this Seagate hard drive has a 5-year warranty
(whose
details I have not read yet).
I can return it easily, should problems like the one you mentioned
become
insurmountable.
I won't get to installing it until tomorrow, at the earliest.
There's no official database on it, but you have an OEM box so a
call/email
to Gateway or look on their site for a BIOS update. Personally if in
doubt I
would just check to see if there's a PCI slot free then pick up a new
interface card as they're not expensive. Get the largest drive you
can
for
the $, you can always transfer it to a newer faster machine later.
Also if you keep an eye out for killer deals it's not a bad idea to
get
two
drives and use one to backup the other.
Probably the best idea, and keep transferring the dat to new drives as
you go.
For the original poster:
Don't make the mistake of thinking that archiving to CD's is any kind
of archiving! If a person does a lot of research (to be sure to buy the
correct ones and to learn the proper handling), never marks on the CD's
ever,(store them in a jewel case and mark on that - go figure on what
to
do if they get mixed up) stores them under ideal conditions, handles
them only with gloves, and prays daily to the CD gods, they just
*might*
last 10 years.
I've had a number of Archive CD's fail after a year. I now to backups
to two separate Hard drives. One on the computer, and the other to a
firewire drive.
- Mike -
Creating an image (ghost) of your system drive is the way I have
resigned to do and as an external drive it can be used to back up
several computers.
Vlad
Until recently, I've gotten away with using a Conner Peripherals hard
drive
of ~820 MB and even a 127MB drive from a PC/AT and the current stable is
2/3
1998 and before and includes ISA cards in some cases. I believe the high
RPMs and increased stress brought along by improved storage technologies
bring on an earlier demise. Few of my devices or cards are newer than 1999
or 2000. I've never had a CD data backup fail. and I believe such problems
are analogous to the CD rot troubles of the commercial audio industry. I
am
certainly not so cavalier as to leave them out and about like some audio
CD
consumers. I HAVE had CD failure and haven't gotten around to
investigating
it with the mfg. That disc took about 8 years to fail also. Proper
maintenance is always a good thing but proper selection of suitable
equipment seems more so.