habbi wrote:
Can a bit set for making cabinet doors be used to make full size 1.5"
thick 80" tall) panel doors. What are some tips on making full size
doors? Thanks

Sure. And all the passage doors in my house prove it.

Depends a bit on the geometry of the bit though. And do some figuring
as to how the bits are going to effect things; for example, you will
probably need to plan on a 1/2" tongue on the panels.

One thing you *can't* do (IMO) is to expect gluing the coping to hold
the rails and stiles together...need more glue surface and a mechanical
joining as well. In my case, I used loose tenons 1/2" x 2 1/2" x 5"-
half the length in the rail, half in the stile.

Tips? keep things square, keep them flat and finsh as much as possible
before joining.

--
dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico