Never heard of mail order or Via the Web?? Check MCM Electronics, Digikey,
Et Al Fin
"John Musselman" wrote in message
news:bfg2e.10777$TZ.10281@okepread06...
There are five 0.1 uF capacitors in your schematic. They are all bypass
capacitors. If you have enough 0.01s, use those instead or the 0.0056s.
The circuit will probably work without any of those capacitors, but you
should add them just to be sure you don't get oscillations.

You can buy a bunch of the 0.1s ($5 or so for 100) from Mouser or Digikey
if you are in the U.S. Get "monolythic ceramic". 50 volt will do.

John Musselman

"mr_vocab" wrote in message
om...
im making this project (a pic programmer)
http://www.bobblick.com/techref/proj...g/picprog.html
it requires a .1uf ceramic capactor but i canf find one at home what
otehr alternatives can i use if any

i ahve a .01 greencap

# 50V NPO 1.5pF x 1
# 50V NPO 3.9pF x 1
# 50V NPO 4.7pF x 3
# 50V NPO 5.6pF x 3
# 50V NPO 8.2pF x 3
# 50V NPO 12pF x 10
# 50V NPO 15pF x 2
# 50V NPO 47pF x 5
# 50V NPO 56pF x 5
# 50V NPO 68pF x 1
# 50V NPO 82pF x 1
# 50V Y5P 120pF x 1
# 50V Y5P 150pF x 1
# 50V Y5P 220pF x 1
# 50V Y5P 270pF x 1
# 50V Y5P 330pF x 1
# 50V Y5P 680pF x 7
# 50V Y5P 820pF x 1
# 50V Y5P 0.001uF x 3
# 50V Y5P 0.0022uF x 2
# 50V Y5P 0.0033uF x 5
# 50V Y5P 0.0056uF x 3

and the following
* 470uF 16V x 5
* 470uF 25V x 1
* 330uF 25V x 1
* 220uF 25V x 2
* 220uF 16V x 2
* 100uF 16V x 8
* 100uF 25V x 6
* 47uF 25V x 4
* 33uF 35V x 3
* 33uF 16V x 15
* 4.7uF 50V x 4
* 2.2uF 100 x 4

but i doubt they would be any good

thanks for your help
nathan