On Tue, 22 Mar 2005 17:12:20 +0000, bubbleyes2004 wrote:

What should I do.

Clean out te carburetta but do not adjust or remove any small screws
unless you *very* carefully note their position. How musch they are
screwed out to withing 1/8th of a turn or better. When screwing them
in gentle finger tight only.

P.S. Have tried to remove blade without success, any ideas on how to
do this would be appreciated.

It might be a left hand thread and be rather corroded, grass juices
are not very metal friendly... The nut will certainly be tight.

--
Cheers
Dave. pam is missing e-mail