I've taken everything out and checked all connections. No solder is loose.
Any other ideas? Thanks for your help!!!!
"Shoreline Electronics" wrote in message
m...
You may have bumped one of the large transistors on the CRT drive board
and
lifted a solder pad.

If your picture is Yellow......then you have good Red & Green
drive......your missing your Blue drive.




==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)

========================

"N8" wrote in message
ink.net...
The actual connection wasn't glued. I should've specified more
clearly.The
mount was loose.. I've since ruled that out as the problem as it gives
me
the yellow screen from RCA jacks and even with nothing hooked up at all.
I've checked and rechecked all the connections inside, but no go.
Everything
works fine it just has a intense yellow tint.

"Jerry G." wrote in message
...
You should get the set properly serviced. There are many things that
can
cause your problem. Gluing connectors is not the way to go. The proper
approach is to replace defective parts, or have them properly serviced!

--

Jerry G.
======


"N8" wrote in message
k.net...
Sharp 27NS50 27" TV 4 years old
The cable connector had been previously come loose inside and I glued
it
and
it worked for a long time.
Recently while moving it the glued connector came loose again. I opened
it
up and glued it back again. At this time it had a perfect picture.
After
putting it back together, now it has a strong yellow tint to the screen
no
matter if it is from cable, front rca or back rca jacks. It even has a
yellow tint to the screen with nothing hooked up.
Should I try working on the jack again or is there another problem?
Any help appreciated.