Morrels Stain followed by a mix of 2 part gloss to 1 part Satin PU varnish.
Smith and Rogers PU is very good. Morrels do a medium oak or a golden oak
which are nice stains. Avoid the red version of the medium oak though it's
a bit too red.
Let the first coat of PU dry till it's 'crispy' Rub down with 400 grit
paper. Wipe clean.
Another coat of PU...Rub down with 400 grit that's a bit tired
Another coat of PU...Rub down with 400 grit that's very tired
Clear wax to finish
A good hard waring finish
Ciao
Nicholas
--
Nicholas Buttle - Quality Joinery and Cabinet Making
http://www.nbjoinery.net
--
"colin" wrote in message
...
What's the best way to finish an oak dining table. Should I stain it then
apply varnish or is staining enough if applied every so often