Patriarch wrote:
Andy Dingley wrote in
:

It was somewhere outside Barstow when "Gene T"
wrote:

that looks a lot like strips of brown grocery paper twisted
together. Is anyone familiar with this type of material?

Yes, it's very common.

Your seat sounds like a rush seat (NB - not "cane"). The best rushes
to do this are still grown (mine come from Holland) but they're
surprisingly expensive and they also only grow in short lengths. So
working a rush seat is as much about continually working new rushes
into the cord as it is about twisting this cord onto the chair
frame.

So to solve both problems, much rush chair work is done with this
paper rush. It comes on long reels of a constant size, so it's far
easier to work with than real rush. Another option is "seagrass".
This is hard wearing (also used for flooring) and easier to work
with than rush, but a "natural" product unlike the paper cord.

http://www.jamiltonupholstery.co.uk/...ct.asp?dept=37

You need to find a supplier of chair caning materials and a simple
book on the technique. I can't really suggest one for Hawaii or the
USA though (I'm in the UK). You might find it through a wholesale
upholstery supplier, but probably not - the cane and rush trade
seems quite distinct from the stuffed fabric trade. I get mine from
"The Cane Workshop" in Somerset

It's not hard to do, and doesn't even take that long. Tools are
pretty simple too, although a good bench vice to hold the chair
while you work on it will do wonders for your back - otherwise rig
up a low platform (couple of stacked pallets) and stand the chair
on that. Don't bend over the chair at floor height.



There's also a product called 'danish cord', which may be a
linen/cotton type of product. May also be made of hemp. Same
suppliers should have it available.

Patriarch

We used to do the Real McCoy with the rush in the bathtub to soak and a
little clorox added if we left it too long. At one time the directions
suggested slipping cardboard between the top and bottom layers (sides and
front - maybe and back - maybe?) but we used thin wood - go through all
that and put cardboard inside? Geesh.

We also varnished the competed seat I don't know if you'd do that with the
Danish cord.

I think the only problem was if you didn't get the rush or what ever you
used packed in tightly enough - then you'd get the 4 sections slipping away
from the middle (with weight after it had been sat on a bit) and you could
see through the chair seat.

Josie