On Fri, 11 Mar 2005 12:13:05 -0800, "AAvK" wrote:
once, in the distant past, buck made nice edge tools. that time is
long gone.
you might try giving them a few more honings- if the factory grind
burned the steel you will need to hone past it.
at best you'll end up with a decent utility set.
No... these are new_old_stock Buck Bros. bench chisels. If you go to
http://www.craftsmanstudio.com/ you'll read the story there. Quite a
nice find really. These blades were made in the 60's and were found
in factory storage at The Riverlin Works. I use the "Scary Sharp"
method.
ayup. sorry about that, brain fart.
I'd still not give up on them based on the first honing.