Thanks,
I forget the Formica number, but it's a blue-green pattern that looks good
over the large amount of counter there is. Last week I used the left overs
to redo the counter in the half-bath adjoining the kitchen. That old
laminate came off very easy, which figures since it's only about 3-4 sq.
feet.
My semi-retired professional carpenter father-in-law had serious doubts
about going on top in the kitchen, but it worked. And more importantly, my
wife loves it - and it saved me a bunch of time from remaking a huge counter
area.
"orangetrader" wrote in message
...
That looks good. It looks sort of corian like from the picture.
O
"R Thompson" wrote in message
news
"PJx" wrote in message
...
On Fri, 04 Mar 2005 11:41:11 GMT, "R Thompson"
wrote:
"orangetrader" wrote in message
...
I have a counter top which is made of plywood with laminate on top.
I
don't
really like the color, and it has a few burnt marks. We are
thinking
of
getting a dish washer, which means I will need to move the
refrigerator
over
24". If I do that I need to extend the existing counter top for
another
24". Since it will be very close to the sink, I would like to do
this
so
the extension can be done as a seamless continuation of the
existing
counter
top so if I wipe it down I can wipe it all the way to the sink.
One way I can think of is to construct a counter top at the same
height
as
the current one, then apply a new layer of laminate on top of the
existing
one to form one continuous surface. Will this work? Can laminate
be
applied on top of laminate? What do I need to do with my kitchen
sink
which
is now sitting on top of the counter? It needs to be removed and
reinstalled?
Can I use any other materials? I don't want to use tiles, but what
about
stainless steel? Can a stainless steel sheet be applied over the
laminate
counter top to give it an industrial look?
Thanks in advance,
O
You have to score the crap out of the original laminate. We did a
double-up
job when we bought our house last year. The counter is U shaped and
very
large, and the orginal (butcher block looking) was really stuck on.
We
belt
sanded until we had really scored up the surface and used 3M (red
can)
contact cement. Do not use the Lowes blue can water based stuff, it
doesn't
stick. We did the counter and all edges ourselves and it looks great
and
has stayed down.
pictures?
Here are some pics from the remodel last summer:
http://home.columbus.rr.com/hoopthompson/housepics/
The counter was a butcher block pattern with the laminate installed as a
backsplash about 12" up the wall also. We bought the laminate from Lowes
and
the adhesive from HD. Been on since last June and looks as good as a
counter
Lowes made for me years ago.