No It says the same when its on. It occured two weeks after I fixed it from
being no picture at all. I had to replace blue crt, shorted HOT and a open
resistor. I was maybe thinking that it was the deflection processor. But i
will go ahead and replaced caps on the convergence board along with checking
cold soler joints.
"James Sweet" wrote in message
news:gaIWd.80134$wc.35510@trnddc07...

"rcolt75" wrote in message
news:UEHWd.38737$Ze3.25791@attbi_s51...
I have 60" rear projection that is having a picture problem. The picture
is
a little too wide and slightly bowed at the bottom but it is ok in the
middle. I'm thinking that the problem is with the deflection ic because
it
controls the geometry of the picture. Any help would be appreciated.

TV is Philips Magnavox
Model:8P6044.



Does it change as it warms up? Did it occur suddenly? I would tend to
suspect solder joints or capacitors on the convergence board, though it's
possible the EEPROM got corrupted.