"rcolt75" wrote in message
news:UEHWd.38737$Ze3.25791@attbi_s51...
I have 60" rear projection that is having a picture problem. The picture
is
a little too wide and slightly bowed at the bottom but it is ok in the
middle. I'm thinking that the problem is with the deflection ic because
it
controls the geometry of the picture. Any help would be appreciated.

TV is Philips Magnavox
Model:8P6044.



Does it change as it warms up? Did it occur suddenly? I would tend to
suspect solder joints or capacitors on the convergence board, though it's
possible the EEPROM got corrupted.