On Thu, 3 Mar 2005 00:56:06 -0800, "Harold and Susan Vordos"
wrote:


"Gunner" wrote in message
news
On Wed, 02 Mar 2005 22:25:40 -0600, "B.B."
u wrote:

For class I'm turning an aluminum flywheel. 3" diameter. The steps
a face the sides, drill & ream the center, press onto a mandrel, turn
the outside and sides. Anyway, after pressing it onto the mandrel (yes,
I cleaned out the cutting oil) I've found that I have to go very slowly
or the cutting tool will grab the wheel and spin it on the mandrel.
What are some good ways to deal with this problem? I already crammed
it as far onto the mandrel as I'm comfortable with. I'm tempted to just
loctite the damn thing.

Superglue works quite well as long as you dont have any tool chatter.
So does regular fingernail polish.

I make my own mandrels by turning a rod to diameter, drilling and
tapping the end, then slitting with a hacksaw or slitting saw. Slip
over the workpiece, then installing a socket head cap screw in the
tapped hole to expand as needed.

Best if done in a collet of course. but works fine in a three jaw if
you dont remove it during any of the process.

Cheap and easy to make, grabs well.

Gunner

Works real well with a pipe plug, too. It's a good idea to try to make
your cuts at 90°, so when you expand the mandrel it does so uniformly and
retains concentricity. Rough turn, drill, tap, split, deburr the threads
with your pipe tap, then finish turn with the pipe plug tightened ever so
slightly. You can do surprisingly precise work with a mandrel so made.

Harold

Ayup. Mine are threaded for 1/8" pipe plugs..but most folks dont have
em, so suggested the standard bolt. The threaded and Tapered pipe
thread is the best way to go.

I slit mine on the Mastermill with slitting saws and the mandrels held
in a 5C indexer.

Sometimes I have to think hard on how to do things when the other guy
may not have Stuff.

Gunner


Lathe Dementia. Recognized as one of the major sub-strains of the
all-consuming virus, Packratitis. Usual symptoms easily recognized
and normally is contracted for life. Can be very contagious.
michael