Jeremy,
It's amazing how much water can come through a tiny defect, in a hard
rainstorm.
Good luck.
There are some great tapes out there.
John

"jj3000" wrote in message
om...
Hi John B,

The roofer came back to check out the situation, I shown him the
valley coating did not fix that previous leak.

He looked and measured for a while, and found that the flashing isn't
dropping down to the scrupper, he explained to me there were 2
flashings for the valley. The top flashing seem to be leaking down to
the bottom flashing at the edge, the bottom flashing is about 10 ft
long each and soldered in the middle (and eventually leaks), which is
about where it is leaking inside the house.

He hammered the lip down and applied some flashing cement with a layer
of fiberglass tape and that should make sure the water doesn't leak
into the bottom flashing.
I hope that will fix the problem..