View Single Post
  #3   Report Post  
MaryL
 
Posts: n/a
Default

Yes. He is the owner of his own construction business, and everything will
be built to code (and with permits).

MaryL


"Michael Baugh" wrote in message
...
Is the contractor going to have a building permit?

"MaryL" -OUT-THE-LITTER wrote in message
...
I posted a question about this to another newsgroup but didn't get any
answers, so I hope I may have found the right NG for solutions this time.

I am having a sunroom added to my house -- starting in 2 or 3 weeks. It
will really be an additional room, with the ductwork of my existing

central
air/heating system extended to include that room. The contractor assures

me
that I have an adequate unit to do that (which will involve an addition
of
approximately 320 square feet).

At present, I have two sets of French doors that open to the area that

will
become the new sunroom. The windows have started to fog, so I am going
to
have these metal doors replaced with wood interior French doors. The
threshold will be removed so the new patio flooring can be flush with the
interior floor, and approximately 1 inch will be cut off the bottom of
the
doors to provide air circulation when they are closed. The existing patio
(really, just a slab of concrete) is in very poor condition and will be
removed. It will be replaced with a larger area of concrete. This time,

it
will have both rebar and mesh for support. I also specified that we use
footers (hope that's the right term) because the soil here is very sandy.

I was originally going to use tile, but the contractor recommended scored
concrete. I looked at some of his samples, and it looks very nice. The
concrete would be stained about 3 weeks after it is poured. He says the
stain will penetrate about 1/4", so I should not have problems with the

type
of white scratches that show up on unfinished concrete when furniture is
moved around. I also want to be sure that this will be easy to clean
(and

I
have cats, so there could be "accidents"). It will be sealed with an

epoxy
sealer.

Do any of you have experience with this type of produce? Is it easy to
maintain, especially after a few years (light traffic area)? What about
scoring versus plain? If it is scored, we will use a thin line to
emulate
tile (not the wide grout) and grout will be placed in the scored areas.

Is
it likely that this will create a problem in future years with cracking

and
lifting, or is this an unncecessary concern?

Thanks,
MaryL