On Fri, 11 Feb 2005 12:46:50 -0800, the renowned "Bob May"
wrote:

I'd doubt the 1" thickness as Peltier modules are a lot thinner than that
normally. Even the xy directions are a bit dubious as the largest normally
are in the inch and a half size.

A lot are 40mm x 40mm x 5mm (roughly) thick.



Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com