Inspect the base drive transformer for cracked solder connections.

They typically fail for a reason...rarely for the halibut!


--
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)

========================

wrote in message
oups.com...

Thats the part. I typed in the wrong part #. Anyway I will try these
suppliers. I've never heard of either, which is good for me since I now
have more resources. By the way, the reason I need the HOT is because
the original is shorted. I crossed a HOT that I thought was close
enough, only to have it also short out. The supply fuse in the
secondary is also blown. I've checked associated components at the
collector side of the HOT all the way to the flyback and beyond, but
don't see a problem. Maybe just time for the HOT to bite the dust? This
set tries to power up but shuts right back down in a second or 2. Have
to unplug, and plug back in to go through the same sequence, otherwise
dead. I hope that a bad HOT/open fuse will cause this symptom. Any
feedback on this same old subject would be great. I am a beginner by
the way. Thankyou.