"Joseph Meehan" wrote in message
...
~KJPRO~ wrote:
"Robert11" wrote in message
...
Hello:

What's a better location for an AC wall plug in type of
CO alarm: a wall socket a few inches off the floor, or a
wall socket mid way up the wall ?

Why ?

B.


Better question to ask is rather the ones you can purchase at a Big
Box store is even going to offer protection BEFORE you have serious
issues!!!

The maximum exposure for 8 hrs is 35 ppm, and for 24 hrs is 8 ppm.
According to the UL Listing company, they will not UL list anything
that sounds before the following guidelines.....

http://www.bacharach-training.com/Ho...ontroversy.htm

Take a look and you will find a false sense of security in using MOST
store bought detectors!!

There is a very good detector I sell, that will provide an alarm at 10
ppm.....at around $200.

Want one that will PROTECT you, or do you want to buy one that is only
WASTING your money?

~kjpro~

I believe there is a lot more to the story than that presented by that
web site. It seems to present information in the same selective manor as
the UFOs are taking over the world sites. A number of unrelated true
statements and a conclusion not really supported by the given facts.

For the use intended, the approved sensors sold in the stores are
fine.
If you look, you will see that there are some inexpensive sensors with
readouts of lower levels, but only sound the alarm when it exceeds a
higher
level. Too many low lever alarms would only cause people to disconnect
them.

Think what you wish, but I don't want any levels of CO above the maximum
rating of 9 ppm (in 24 hrs) in my home!!

Not to meantion that lower levels than that give me a headache anyway.

~kjpro~