On Tue, 25 Jan 2005 15:53:29 GMT, rijo1 wrote:
Thanks everyone for participating in this disscussion . This problem is in a
liniar amplifier . The plate that glows red is the driver tube . The tube is a
6LX6 and is not that expensive . The 4 driven tubes are 8908 tubes and are$
93.00 each . Anyway all the tubes are designed to have 6.3 v. to power the
filaments . Like I said , the voltage coming from the transformer is 7.2v. These
voltages were all checked on the bottom of the tube sockets .

I feel that being the voltage is so high on the filament that it is
making the tubes over conduct and saturating the plate .

Not even a possibility.
Your illegal CB amplifier has some other problem.