Colin Wilson wrote:
To cut long story short the wire to light 2 has been cut and I was able
to pull the wire out.


Bad move - if you`d left it in, you would have been able to use it as a
fish-wire...

Not sure if you`re technically allowed to do this work now under part P
as you`re essentially rewiring a point.

Nah, I'm sure he's doing a repair! Anyway, up and to the side is going
to be a mare. You may find it _easier_, but by no means easy, to come
down. Push some packing tape in the lower hole, and allow it to form a
loop inside the cavity. Use some fairly stiff wire and push it down the
cavity, catch it with the loop, and pull in your lighting cable. Job
for two.