meirman wrote:
I have an Eico kit oscilloscope, that I bought used about 25 years
ago. (In NYC, from the store on the NE corner of the streets one block
south of Chambers and one block west of Broadway.)

I'd like to use it to check the the sparkplug waves on my 6-cylinder
car. Is there anything special I need to do? I would just try it,
but the scope is buried deep under uncompleted projects and other
stuff. .

Meirman
--
If emailing, please let me know whether
or not you are posting the same letter.
Change domain to erols.com, if necessary.

I assume that's just a normal 'scope, and not one intended for
monitoring spark plug voltages.

You need to limit the voltage the 'scope sees. Certainly _do not_
connect it directly to a plug. You can either use a HV probe
(probably worth more than the 'scope) or you might be able to rig
something up with inductive coupling and a neon bulb as a limiter.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .