Jerry-Thanks for the reply. I do have the tools/skills to do a proper
job. I don't believe this model is bluetooth compatible. Long story,
but I didn't pick out the phones (my wife has one too), unfortunately.
I think it's the "bottom of the line". Do you happen to know the exact
model of your Motorola headset? My wife actually got a no-name Chinese
headset for her a56i on Ebay that had the right plug & the loop around
the ear, it actually performed fairy well but the GD wire & plug were so
flimsy it broke within a month. If I could get one that was more than
an earbud & did the job I'd pay 40 bucks for it, but nothing seems to be
available. Oh well, not the 1st time I had to do something myself to
get it done right...
Dan
Jerry G. wrote:
I cannot believe that Seimens does not have a descent earpiece system for
their phones. I have seen this one, and it is very good.
http://reviews.cnet.com/Siemens_PTT_...-30547985.html
No wires, and it is neat to use. Check out if it will work with your model
of phone.
If you decide to do this modification:
You may find that some of these earpiece systems do not use standard copper
wire. They may use a specially metallic flexible wire. This type of wire
cannot be soldered. They use a special type of braising and crimp system to
join and attach their wires. All of these types of earphones are
non-serviceable.
When you do this adaptation (if applicable), as for the wiring, make sure
you do the proper soldering job, and with a good quality heat shrink wire
tubing. You don't want to make yourself a mess with black tape and crap like
that.
You would have to cut the wires from an original Siemens headset, and
measure the headphone unit with an ohm meter. From this you should be able
to determine the earpiece providing that there is no amplifier chip internal
to it. The microphone will most likely be an electrets type microphone.
You may run in to some problems in the way that the earphone may have an
internal amplifier that has to match to the Siemens phone. There may be some
impedance matching problems, and also problems in properly matching up the
microphone.
When working on this little project, you must take care to not short out
anything, or have any static electricity present. The earpiece port on your
phone is very sensitive to this.
I would guess you went around to a number of places that sell the optional
accessories for your type of phone. I am sure that there must be a large
variety of OEM options that you can have. This is a very large market.
As for myself, I have the Motorola earpiece that has an adjustable
ear-holder that is part of it. This is a type of strong plastic ear-loop
that goes over the top of my ear, and holds the earpiece to my ear. The
microphone is attached to the base of it, and extends out. For this to fall
off, it would almost have to take my ear with it. I also found the sound to
be of good quality, and the earpiece is very comfortable. I may have paid
about $45 US or so for it. It is one of the best I have seen so far. This
one was made for Motorola by a company called Telex. You can also get in
touch with them to find out what they have that can work your phone, if this
is possible for them to do.
I can see from the Siemens site, that they don't offer much in the way of
variety for headsets. But, their quality is supposed to be outstanding.
Siemens Earphone For Phones:
http://communications.siemens.com/cd...html# content
http://communications.siemens.com/cd...rNrNrN,00.html
An interesting question is why didn't you get a Motorola, or Sony, or some
other make of phone that has descent, or universal type compatibility to the
rest of the world for accessories?
With my Motorola phones, I can go almost anywhere and buy many types of
accessories and add-ons that I would want. We have 4 Motorola phones in our
family. We also have one AudioVox phone as well, and its earphones are
compatible to the Motorola's earpiece.