Hi;

This puppy came in with lines that got worse as it warmed up and eventually
lost all tuning on the main tuner. I put the cap tester down after I saw the
coolant.

So I cleaned it and now have very different symptoms. There is no tuning at
all, no convergence correction and it's dark. All supplies seem to be normal,
but I don't have a print. There is however no pin on either tuner with 32
volts.

From what I can see this set doesn't use a zener for that supply, there is no
higher source coming from the power supply. There is a 32 volt though so I
assume that's where it comes from, err is supposed to come from.

I suspect with all the handling one of the feedthrus might've popped, may even
have been weakened by corrosion.

At this point it would help me to know which of the tuner pin(s) get the 32
volts. That would give me a convenient point into which I can backfeed the
supply.

Does anyone know which pin this is ? Also if you experience on these do you
happen to know if the 32 volt source should affect the convergence and video ?

Thanks in advance.

JURB