"Rich" wrote in message
news:FKZEd.729$_d4.452@fed1read05...
The MinWax Wood Finish can says "Remove excess stain with a clean cloth.".
So does that mean the wood is still damp because I was supposed to wipe
the
stuff off?
Is this right:
1. Apply a coat of stain to the wood
2. Wait 15 minutes and wipe excess stain off with something like an old
t-shirt
3. Wait 8 hours, then use the Spar Urethane
I guess I forgot step #2 ???
Wipe it down, paint it tomorrow. I used the Spar varnish on a couple of
outdoor rockers. Give them three coats and then one coat about every four
years.
|