A pic would be helpfull. F E Reed parts are out there, but you just
have to find them. I have one mysef that was missing parts, so I
converted it to a wood lathe until I coud find what parts I needed. I
have since found the parts, and have everything I need to convert it
back to metal cutting, however I use the hell out of it as a wood
llathe so odds are its gonna stay a wood turner.

On Tue, 11 Jan 2005 12:45:52 GMT, "Lloyd E. Sponenburgh"
wrote:

===I bought an F.E. Reed lathe from ca 1930's. Can't find the serial number.
===
===I need a new bull gear on the headstock spindle (the one the back-gear
===engages), and a new headstock spindle bearing cap.
===
===I can machine the cap, but am not versed in pouring and reaming babbits. I
===am no good at all at hobbing gears.
===
===The lathe has: separate feed and threading drives. The threading is done
===via manual change gears, and conventional lead screw with the takeoff
===through the bull gear on the headstock spindle. Feed is done via flat belt
===drive from the outboard end of the spindle to a feed transmission that
===drives the feed shaft. Longitudinal and transverse feed are taken from the
===same shaft, so you can't do both at once. Longitudinal feed can be stopped
===with an automatic disengagement clutch on the feed shaft. Both the
===headstock and jackshaft are flat belt drive. The lathe comes equipped for
===(and with) a taper-cutting attachment, but has no compound.
===
===Ever seen one? Know of any parts sources?
===
===LLoyd
===


REMEMBER: "This is worth repeating for benefit of al newbies!
Jo Ann asked Dr. Sooooooooooooooooolow to remind people that while she has retired from selling GF (and sold
the business to Ken Fischer http://dandyorandas.com/) she has NOT retired from
helping people with sick GF and koi FOR FREE. 251-649-4790 phoning is best for
diagnosis. but, can try email put "help sick fish" in subject. Get your fish at Dandy Orandas
Dandy Orandas Dandy Orandas........you guys got that DANDY ORANDAS