Leon wrote:


"J. Clarke" wrote in message
...

While I doubt that anyone would move wood through the saw that fast, if
you
hand slips or something startles you that's another story. 4.5 MPH is a
fast walk--it's not hard to move your hand faster than that.

Yes , true, some one is going to do that eventually.


And according to Sawstop's own claims about stopping time, the blade
would be 10mm (not quite half an inch) into your finger, which for most
of us means your finger would be more off than on--it might be hanging
together by a bone sliver and the flesh on one side but it will
definitely not be in
good shape.

I'll agree to that also although a 1/2 in deep cut is still pretty
serious, think of how bad it would be if the blade continued to spin with
out any
type of stop.

I don't know about your fingers but on mine it wouldn't be much worse. 1/2
inch in most if not all of the works would be severed and what's left would
probably work about the same afterwards as if it had been completely off.

I can assure you that your reaction is not fast enough to
stop pushing your hand or finger through. Been there done that with a
blade
that was coasting down to stop. I almost cut my thumb off at 2 places and
untill I saw the blood was under the firm belief that I had a kick back.

--
--John
Reply to jclarke at ae tee tee global dot net
(was jclarke at eye bee em dot net)