Jeff,

you might want to pull the yoke and shellac it. These are the ones that
short out. You can sometimes see a green spot on the windings where
corrosion is taking place. I think some of it is due to the dried glue like
you see on the boards. I have had several shorted yokes on these that kept
taking out vertical outputs. The only scrappers I have had on this model
have been for the bad yokes. Otherwise we fix them, caps and all and the
CRTs look surprisingly good for their age.

Leonard

"Shoreline Electronics" wrote in message
m...
Make : Mitsubishi
Model : CK3536R
Part # 330P18101

The original one has a severe buzz (60hz). Would like to have
replacement
as opposed to going the shellac/reglueing route. Customer is using the
set
in the mean time. Would like to do this fix in one visit.

Anyone got one from a junked set?

Maybe other 35" yokes from this era are similar?


=================================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
(860)399-1861
(860)664-3535 FAX

=================================