"Michael Mcneil" wrote in message
news:c794f241a4c547cb6d1807d505b6bae9.45219@mygate .mailgate.org

"Ben Blaukopf" wrote in message


Is this normal?? The worktop is a B&Q Ebony black gloss.

If it starts smoking, you have too much of a cut for one pass with a
dull blade going far to slowly along the cut. A vicious circle as when
the blade is dull, you need to take longer.

A trick in an emergency is to saw to as near the line as possible then
cut the straight edge with a router. In that case you only need to
remove some 1 or 2 millimeters.




--
Posted via Mailgate.ORG Server - http://www.Mailgate.ORG