On Thu, 30 Dec 2004 21:47:04 -0500, "David F. Eisan"
wrote:

Evening All,

I have a ton of doors to make and I didn't like the idea of hand feeding all
that material over my router table. I have been meaning to make a new better
router table, but I have just not got around to it, so I brought home a
power feeder from work and just bolted to my existing somewhat down and out
router table.

The router table is the only piece of woodworking machinery that has ever
bitten me and I am leery of hand feeding boards over it. I must say that
pushing the board into the first wheel, and grabbing it from the third wheel
was much easier on the sphincter muscle than hand feeding. Not only that,
but running at 14 ft/min gave excellent quality of cut with a set of CMT
cutters, no burning and no discernible milling marks. Not like when I was
hand feeding, little burn marks when I was moving my hands, or jiggles in
the profile. I am sold on this and wish I had bought one a long time ago.

The Delta 36-850 1/4 HP power feeder parts out of the box,

http://www.federatedtool.com/david/img/parts.jpg

The power feeder mounted to my router table,

http://www.federatedtool.com/david/img/ontable.jpg

A bunch of rough cut rails,

http://www.federatedtool.com/david/i...ghcutparts.jpg

The rails all milled,

http://www.federatedtool.com/david/img/milled.jpg

Runing the rails through the router table with the power feeder,

http://www.federatedtool.com/david/img/runthrough.jpg

All the rails milled,

http://www.federatedtool.com/david/img/milled2.jpg

These are all rough length and some multiple length, I will cut all the
rails and stiles from this stock tomorrow.

David.

David, I reckon you are due for a spindle moulder (shaper Keith). No,
make that overdue.

Go on, you know you want one...

http://www.deltawoodworking.com/index.asp?e=136&p=954

Avoid the home page, it has been infected with the Handyman Club of
America virus

cheers
Groggy

BTW, finished that kitchen yet? Enquiring minds etc...