On 28 Dec 2004 21:23:23 -0800, "arw01"
wrote:

The following illustrates the problem:

http://alan.firebin.net/images/cab_stripes1.jpg

http://alan.firebin.net/images/cab_stripes2.jpg

It was suggested on another mailing list to just sand the ply. I would
rather find a conditioner or like to know if I cut Zinser 3lb clear
shellac down to like 1/2# or 1/4# if that would "solve" the
manufacturing problem when the sheets were made?

These are the inside of drawer holders, and not going to be seen.
Thanks
Alan



looks like the factory drum sander marks to me. go out and get
yourself a good random orbit sander. I have the PC right angle one- it
works well, as do some others.