Aren't you supposed to bend them into position? Also there may be different
instructions for US vs Europe. Make sure you are looking at right one.

Also be very careful with electrical connections. It is very common for the
wire nut to let go after a period of use. Make sure wires are wrapped
together and fastened properly with the nuts.


"Javier Henderson" wrote in message
...
willshak writes:

On 12/30/2004 12:03 AM US(ET), Javier Henderson took fingers to keys,
and typed the following:

Greetings,

What is the secret on those little brackets that attach Bosch
dishwashers
to the surrounding cabinet? In case it matters, this is an SHU43C02
unit.

The drawings on the installation manual don't match reality at all, they
talk about slots that allegedly are found on the front corners, but
those
slots are nowhere to be seen...

Thanks!

They look like they should be on the top near the corners.
http://www.boschappliances.com/docum...lation_eng.pdf

But as I said, the drawing doesn't match reality, and the slots are
nowhere
to be found.

-jav