Mike Rocket J. Squirrel Elliott wrote:
On 12/17/2004 6:50 PM MG wrote:

Could use a router with a 1"/4 or 1"/2 bit, whatever your router
collet is, and plunge placing the router face against the wall. Once
you got a pilot hole you have a chance. Whatever!


Heh. Not a bad idea . . . except I reckon the 14mm brad-point bit I have
on order is too long. I like it otherwise, esp. the idea of jamming a
14mm bit into MDF at 20,000 rpm. Yee haw!

Err, he never said put your 14mm bit in the router. Read.