View Single Post
  #5   Report Post  
Jerry G.
 
Posts: n/a
Default

There is no practical way to adjust this. I am aware of this problem in
these models. Most people don't play these sets so low. Usually they run the
line out to sound system, and thus use the volume control on the sound
system.

I would not put resistors in series with the speakers. This will cause a
mismatch between the output stage and speakers. It is not good practice with
these sets.

--

Jerry G.
======


"Joe D" wrote in message
news:1E_vd.198217$V41.141198@attbi_s52...
Hello all,

Does anyone know how to change how loud the lowest setting is on a
KV-27FS100? For example, on "one bar", it's totally silent, but on "two
bars" it's too loud for late night watching. My other Wega doesn't have
this problem.

I found some instructions for getting into "service mode", but none of
the settings jumped out at me.

Thanks for any pointers,
Joe