View Single Post
  #9   Report Post  
davexnet02
 
Posts: n/a
Default

On Wed, 15 Dec 2004 00:11:54 -0500, "Leonard Caillouet"
wrote:


"RonKZ650" wrote in message
...
As I mentioned, the CRT filaments are not lit at all.
I'll check the CRT board to see if anything shows up there.
Thanks,


If the filiments are not lit, you have no HV.


Not necessarily. Could just be an open on the filament line from the FBT.
Could be an open filament.

Leonard

Thanks for the info - as I mentioned I *suspect* there
is HT, because I get the sense and sounds of static on the
screen when I first turn it on. I get normal audio,
but no raster at all.

Appreciate all the comments!
Dave