A router with a straight bit and a straight edge guide. Cut the rectangle
out, then cut the patch the same size then glue in place. You will need to
trim the curved corners in the hole with a utility knife and chisel.
Practise on some scrap first.


"Aaron" wrote in message
oups.com...
Hi, was wondering if anyone could help me.
I installed the floor about 2 years ago and now have a spot that needs
to be repaired.
When I did the install, I cut and glued all the pieces together and now
I need to find a way to get them apart...
Anyone have a good idea/plan to get the glue loosened up at my starting
point?

I tried a clothes iron, to try to heat the tiles up some, but that
didnt work..

Any help would be greatly appreciated.

Thanks - Aaron