I picked up a thread from uk-diy news group about towel radiators -
however I treid the same approach and so far am having no luck.

I am using a digital timer to connect to a fused/switched spur to
automate a Towel Radiator switching on and off.

The timer has two live wires and the spur has two live and two
negative
connections ( one for in and one for out).

The spur has always worked, its the addition of the timer that is the
issue.

I took the two connectios from the LIVE in on the spur and connected
to
the timer, then the other connection from the timer back into the
spurs
live IN connection.

I switched the timer to ON. Yet Im not getting any power to the
heater. I
checked the fuse - it was fine.

Can you offer any advice from your experiences?