Originally Posted by MrAoD

(barry martin) writes:

Surf:

S I'm trying to help a neighbor set up a computer and printer that her
S out-of-state son shipped to her.
S
S My neighbor's house was build in the 1960s and only has two-prong
outlets.
In
S the past, whenever she wanted to use a 3-prong plug device, she just used
a

S adapter.

Of course.


S I'm wondering if it would be okay to plug in the surge protector/power
stri

S her son sent into a 3-prong adapter and then plug that into the 2-prong
wal

S outlet. There would be three devices plugged into the power strip/surge
S protector: a CPU, monitor, and printer.

AFAIK a surge protector will not work if the ground isn't there.
(BTW, also be sure to surge-protect the cable and/or telephone inputs
to the system.) I would get a $10 outlet tester (available at most
hardware departments -- are about the size of half a fist and have
three LEDs). If the outlet box is grounded the outlet tester will
light up the proper two indicators (plug the outlet tester into the
adapter, the adapter's ground tab is either screwed to the non-painted
outlet cover screw or the ground wire is connected to the metal outlet
box).


My parent's home was built with BX armored cable wiring. Two wires into the
box and the metal armoring was ring-nutted to the back outside of the box to
provide the ground. As Barry suggests, get a cheap outlet tester (an LED with
two wires/contacts attached). Remove outlet plate, test for current by placing
one contact in a slot and the other to either the screw(hole) or the box
itself. For good measure test the ground against BOTH outlet slots. If you
get a good ground signal it's easy enough to wire in a three-prong outlet.
I've done about half my parent's outlets (and incidentally ALL of my own) w/o
problems.

Marc