Can be C509, 502, 506, 503. These are very likely to give this type of
fault.
Use an ESR meter to properly check the caps, or change them.
--
Jerry G.
======
"Phil Nelson" wrote in message
link.net...
I need help fixing the squished vertical in my Sharp 3LS36 TV. This is a
mini color set from 1986. You can view the symptom at:
http://antiqueradio.org/art/temp/Sharp3LS36Screen.jpg
A piece of the schematic showing the vertical circuits is at:
http://antiqueradio.org/art/temp/Sharp3LS36sch1.jpg
I have replaced C501, C502, and C503. I measure 9.4vdc at pin 14 of the
IC, as spec'd. At pin 13 next door, however, I measure close to zero,
rather than the 6.8vdc called for.
Ideas? This kind of project is a little beyond me. I can fix old tube
radios, but don't have solid-state expertise or equipment. So any hints
would be much appreciated.
Thanks!
Phil Nelson