Hi Keith. Your method will work but once assembled it is there for good. You
could drill the hole a little undersized and then screw the cork assembly
into the wood. That's how I assemble my wine stoppers.
fwiw, Tom
--
Remove the 'p' from 'shaw' to e-mail me.
"Keith Young" wrote in message
...
Hi
I recently bought wine corks with a screw attached. The thread appears to
be a metal thread. There was no part supplied to counter sink in the top
or
wood portion. Should I just drill the wood top to accept the screw and
expoxy the screw in the hole.
Any suggestions
Keith
Newfoundland
Canada
e-mail