I prefer a shop made version a la Tage Frid. From what others have reported
on the Delta tenoning jig, you can make your own jig and be cutting tenons
in less time than you will spend cleaning up a Delta jig to be usable.

Jay



wrote in message
...
OK - Tennoning Jigs. Any recommendations?

Considering

$79 Shopfox Woodstock -
http://www.grizzly.com/products/item...emnumber=H5782

$85 Delta 34-183
http://www.amazon.com/exec/obidos/tg...86427?v=glance

$109 Jet 708111
http://www.amazon.com/exec/obidos/tg...&s=hi&n=228013

$106 Rockler http://www.rockler.com/ecom7/findpro...=10185&clk=412

I did a Google search and read the comments about quality of the delta and
that the Jet and powermatic are identical. I have not read anything about
the shopfox or rockler. I did see some previous posts about having to
tweak the miter guide rail on some saws. I have a Grizzly 1023 right tilt.
I'm thinking the shopfox should be as close to plug and play. Are the
slot to blade measurements the same on Griz and Delta and PM?