Thread
:
Cordless drill with good torque - recommendations?
View Single Post
#
10
Mark S.
Posts: n/a
On 26 Oct 2004 20:36:50 GMT,
wrote:
Mark S. wrote:
www.karman.demon.co.uk
frontgarden09
fenceslats01
Put that together from scratch/scrapwood with my Bosch PEX400 sander
and Bosch 24V cordless drill - can't fault the drill for torque, put
four screws in every plank - there's another 4 panels at the other
side of the drive so that's around 500 odd screws. ;-)
Cordless drill/driver - with hammer action
24v rechargeable 1.3Ah battery
Charging time 1 hr
13mm chuck
Variable speed and reverse
Max drilling dia: wood - 30mm, steel - 13mm,
masonry - 15mm
Think it's that one. You can feel the torque when you pull the
trigger as it twists in your hand. ;-)
I think it may be a bit heavier than I'm after. Can you tell me the
model number?
PSB 24 VE-2
I've handled a friend's Ferm (12V I think) and that was very heavy
compared to my Bosch. :-)
Mark S.
Reply With Quote