On 26 Oct 2004 11:44:16 GMT, wrote:

I'm thinking of buying a cordless drill specifically for the task of
screwing 6 x 100 and/or 8 x 100 screws into fence posts. (Those are
mm sizes, TurboGold screws)

My (very) old 12 volt Skil cordless managed the 6 x 100 OK but is
beginning to feel its age now (it's probably 8 or 10 years old),
and it will probably find the 8 x 100 screws rather hard going.

I already have a cheap Ferm 24 volt cordless combi which is fine for
what it does but it's a bit big and heavy for driving screws and I'm
not really sure that it has much more torque than the Skil anyway.

My criteria are something like the following:-
Probably 12 volt or 14.4 volt to keep size/weight manageable
Probably a 2-speed gearbox for the torque I need
Compact and light (ideally in the 1.5/1.6/1.7kg range)
Maximum torque at least 30Nm, I'd really like 50Nm
Less than £100 if possible though I realise it may not be
Two batteries

What would people recommend? The torque requirement rules out most of
the really cheap ones I think, they either don't state the torque or
it's around 15 to 20Nm. On the other hand I'm not after a tool that
can handle lots of abuse and last for ever on a building site, I'm
really not going to work it that hard.



What about an impact driver like a Makita 6916 or Axminster have a
Hitachi one at £150.

I believe that these do well in this type of application, but please
check.


..andy

To email, substitute .nospam with .gl