Allan wrote:
Fellow d-i-y'ers. It has been a loooong time since I have visited but now I
have a small problem.
'er indoors felt the need for a new en-suite - so yay and verily it was so.
Everything has been going smoothly (or as smoothly as removing and fitting a
new en-suite can go) but after fitting the new toilet, I seem to have a
small leak from the waste pipe.
Now I could go pulling it apart etc, but if any of you chaps had any sage
advice about fitting toilets - and in particular ensuring that the watse is
well and truly sealed - I would be most grateful.
Get a gun and some sanitary silicone.
Empty bowl as far as possible.
Get her to **** and pee somewhere else for 6 hours.
Inject the stuff into any place it will go (around the waste joint of
the toilet that is..)
Clean up with white spirits and a ****load of bogroll. (the toilet, that
is).
Took about 3 goes to seal every little chink in mine, but its rock solid
now (the toilet, that is).
Al.
|