On 20 Oct 2004 12:02:43 -0700, (eddie) wrote:

The garage will be a fish house, what if i put 2x1 batton on the wall
then fixed the sheets directly on to the batton so creating a 25mm gap
between the wall and boards tape this then use a hammer fixing (nylon
plug with drive screw) to go through the plasterboard and insulation
through to the wall then plaster over the board.



You could do that, but definitely make sure you tape the joints with
foil tape. You want to keep any humidity inside and not allow it to
reach anything cold.

If you make stands for the aquaria, they will need to be floor
supported. No chance of using the walls.


..andy

To email, substitute .nospam with .gl